RAVAK Basic 90 Shower Tray Waste Trap
Shower tray Basic waste trap
With high popularity and quality. Good price-quality ratio of a waste trap with polished stainless steel grille.
Without a waste trap no shower tray could fulfil its purpose and drain water away during showering. Because a shower tray is a built-in part of a bathroom, choose only drains that are made of the highest-quality materials that will truly last.
RAVAK Basic, Standard and Professional shower tray waste traps have a diameter of 90 mm and a drainage flow rate of 30 l of water per minute. This allows their use in shower enclosures with a hydro-massage panel. All RAVAK shower tray waste traps can be cleaned from the outside, which is a prerequisite for their use with shower trays installed in a “fixed” manner. Standard and Professional waste taps differ by the type of material used for the waste trap cap. The Professional waste trap is equipped with a metal cap, while the Standard waste trap has a metal-plated plastic cap. We recommend these waste traps for Galaxy Pro shower trays. For deep seating Sabina shower trays we offer the Sabina waste trap with a 52 mm diameter opening for the waste trap and overflow. The drain of the shower tray is controlled by the ClickClack system (pressing the waste trap stops the drainage and pressing it again starts the drainage).
Adequate drainage volume
RAVAK waste traps are able to drain a minimum of 30 litres of water per minute, which means they are able to handle a shower enclosure equipped with a hydro-massage panel.
Easy to clean
Easy access and the ability to clean the waste trap are essential for your peace of mind and long-term confidence. You needn’t live in fear that the waste trap will clog and you will be forced to find a plumber.
For every RAVAK shower tray model
RAVAK waste traps are available in three types to cover each shower tray model.
- Diameter: 9 cm
- Height: 8.4 cm
- Water outflow per minute: 31 litres
- Cover cap: Polished stainless steel grille
The Basic 90 shower tray waste trap is suitable for all types of shower trays (90 mm diameter) except the deep Sabina trays. We also supply adapters eliminating size differences between the RAVAK waste traps (40 mm diameter) and drain pipes (50 mm diameter).
|X01308||Siphon RAVAK Basic 90|
|X01304||Seal reduction 40/50mm|